"Rapid heating electric water heater" is an independent category of electric water heater products that is different from the storage type and the instant heating type. The use of rapid heat engine heating technology, so that low power heating, fast hot water is possible. Anti-corrosion and descaling technology, optimize water quality, protect the liner from long-term corrosion. Anti-resistive wall, rapid heat engine heating technology, multiple leakage protection device, three guarantees, safe use. Low power technology, microcomputer water temperature monitoring, protect the best internal and external temperature balance, thermal insulation power consumption, energy saving, money and worry.

Because the volume of the fast heating electric water heater is relatively small compared with the storage electric water heater, the power is lower than that of the instant heating electric water heater, so the average resident can be installed at home; However, many friends do not know what the principle of fast heating electric water heater is, so there are doubts about the safety of fast heating electric water heater; To understand the principle of fast heating electric water heater, it is necessary to understand the structure of fast heating electric water heater.

Compared with the storage type electric water heater, the volume is smaller than that of the storage type electric water heater, and it combines the advantages of the thermal type in terms of safety and electricity isolation, and is the first choice for family safety and confidence. This is also why businesses are optimistic about the reason for fast heating electric water heaters, fast heating electric water heaters market is relatively large. Among them, the fast heating household appliance brand, fast heating electric water heater to join. The structure of the gallbladder in the gallbladder of the fast heating electric water heater is that there are two double-mode gallbladder inside the water heater. The water inlet and the water outlet on the inner tank are arranged at the lower and upper ends of the inner tank, and the cold water in the inner tank is fully in contact with the electric heat pipe, and the electric heat pipe can quickly heat the cold water into the small inner tank to improve the heating efficiency of water.

One end of the tube is connected with the water outlet, and the other end is extended to the upper part of the inner cavity. The hot water tube can direct the hot water in the small inner cavity to the upper part of the inner cavity, and the cold water in the lower part of the inner cavity enters the other inner cavity through the small hole in the lower part of the inner cavity, forming a dynamic circulation storage system in the electric water heater, speeding up the heat transfer speed of the water. This structure of the rapid heating water heater is only a heating rod located in the small bladder, on behalf of the brand has thousands of degrees, to thousands of degrees of the rapid heating electric water heater as an example, in ten minutes you can heat the water at full speed to 75 ° C (the national standard rapid heating of the water temperature should not be higher than 75 ° C), 20L water heating to 55 ° C constant temperature also takes about 4 minutes. This is the difference between fast heating electric water heaters and storage electric water heaters.

The gallbladder structure of the quick heating electric water heater is that there are two double-mode gallbladder inside the water heater. The water inlet and the water outlet on the inner tank are arranged at the lower and upper ends of the inner tank, and the cold water in the inner tank is fully in contact with the electric heat pipe, and the electric heat pipe can quickly heat the cold water into the small inner tank to improve the heating efficiency of water.